Manage Kernel Modules and Parameters

10 minutes
  • 3 Learning Objectives

About this Hands-on Lab

The kernel works as the interface between our hardware and the processor, and much of its functionality is contained in individual modules that we can add, remove, and reconfigure as needed. In this lab, we’ll enable a module while also changing one of its parameters. _This lab is not approved or sponsored by Red Hat._

Learning Objectives

Successfully complete this lab by achieving the following learning objectives:

View Module Parameters

1, View the available parameters for iscsi_tcp.

Change the Settings
  1. Turn the module on while turning debugging on.
Confirm Module Changes
  1. Confirm the changes.

Additional Resources

There is an iSCSI-related kernel issue and you need to ensure the iscsi_tcp module has debugging logs available. Ensure the kernel module is running and using the appropriate parameters.

What are Hands-on Labs

Hands-on Labs are real environments created by industry experts to help you learn. These environments help you gain knowledge and experience, practice without compromising your system, test without risk, destroy without fear, and let you learn from your mistakes. Hands-on Labs: practice your skills before delivering in the real world.

Sign In
Welcome Back!

Psst…this one if you’ve been moved to ACG!

Get Started
Who’s going to be learning?